Barge Boards, Fascias & Soffits
In addition to our UPVC guttering we supply and fit barge boards, fascias & soffits. Both UPVC and Aluminium options are available in a range of heights and widths suitable for most applications. Some our most popular styles come in Flat, Square, Ogee and Bullnose. Take a look at some of our installations.
Already have something in mind? Speak to us, we will have something to suit every budget and aesthetic requirements. Furthermore we also provide a range of cladding options.
The barge board is the board that is used on the gable end of a property. We supply and install a wide range of barge board styles and colours.
If you have existing timber barge boards and the timber is relatively sound, then capping barge boards are advised. We use 10mm thick barge boards. These are available in up to 5 meter lengths, with various heights available.
The fascia board is the long straight board that runs along the lower edge of the roof. Again these come in a range of materials, widths, heights, colours and styles.
If it is old timber boards that are being replaced then our multi purpose Soffit Boards are ideal, they are 10mm thick and come in a range of widths from 100mm (4″) to 404mm.
When it comes to new builds we will need to use a pre-vented soffit which has vent slots, these provide ventilation to the equivalent of 10mm clear air gap this meets current building regulations for new roofs of 30 degree pitch and above. For flat roofs or roofs with a low pitch we recommend double vented board.