Guttering is an important part of a house or buildings structure. Proper maintained guttering can save a building from excess water from rainfall damaging the walls, both internally and externally. If left to continue, walls can begin to decay, damp can spread to internal walls and pest infestation can occur. With the use of well-maintained gutters, this can be prevented cheaply and constantly.
There are many things that can be seen when a gutter system needs repair. Many of the signs can be seen early on and if noticed, should be addressed immediately when possible to avoid any costly or long lasting damage to a building. After a fair amount of rain, it is wise to examine the gutter system to notice any leaking or overflows.
By doing this, you can identify any issues before any damage is caused the property. Also, keep an eye out for any overflowing which could be caused by blockages may lead to ground erosion or marshy conditions. From prolonged exposure to these conditions, walls can and will begin to absorb the moisture. Creating pockets of damp and mould that may lead to health issues from prolonged exposure or crumbling walls which would weaken a buildings structural integrity.
Other indications that a leak or an overflow has formed can range from many different pieces of evidence that can lead to the area of an issue and a possible type of issue at hand. Keep an eye out for external walls that have begun to become damp, stained or slimy. Depending on the location of the evidence, this could indicate a minor leak which has begun to collect and drip from a lower part of the guttering system to a larger leak that is losing a high volume of water to quickly to be taken away and disposed of as intended.
Another piece of evidence to be considered are puddles that have formed. Once the ground has dried but a puddle of various sizes still remains for extended periods of time, this will mean that a leak has formed which is slowly dripping backed up water forming a puddle below. This indicating that a small crack or slight gap may have occurred within the joints or sealants.
Other causes may be poorly aligned gutters, either from bad installation or from extreme environmental weather like high winds or physical damage from swaying branches. While most signs can be seen, the smell of damp from internal rooms are another indication of an issue of damp from a faulty guttering system.
Regular maintenance of gutters is important to ensure continued functionality for gutters at their peak performance as well as to identify any potential issues before they grow or begin to inflict damage on both the exterior or interior of a building. Considering this, annual maintenance is recommended, more often for debris checks if an Ogee style guttering system is installed.if
Despite this, caution must be taken when maintenance is performed, both personally and when a professional is hired. Working on gutters involve the use of ladders which must be firmly secured to the ground as a fall can lead to extremely serious injuries, particularly with gutters installed high up.
Repairing can be done personally or by a professional, small jobs can be carried out personally if you are confident to ensure the continued usage and longevity of a guttering system while large jobs should be carefully undertaken or should be given to a professional to be carried out. Consider the material as well. Heavy materials like steel that require a reapplication of sealant which may be too much for an inexperienced person to carry out while materials like PVC are extremely light as well as easy to handle when sealant needs to be reapplied.
When a leak has occurred around a joint, the first step which must be taken is to let or remove any water within that section as well as any debris or dirt which would get in the way or obscure your exanimation. Once removed, inspect the sealant for any wear and tear that may have been afflicted from time or physical damage. If there is no damage, consider checking for any sagging in the pipes leading to the joint. A possibility is that some of the brackets have become lose or needs additional support which has caused sagging to occur in the guttering system.
If the sealant has become damaged and is the cause of the leak, carful remove the sealant using a flat headed screwdriver before replacing with new sealant in the same area before using a gloved finger to smooth over the newly placed sealant for a smoother finish whilst ensuring that no gaps remain. When there is a leak around a union piece, then a gasket may be damaged inside.
To reveal and replace this gasket, you must squeeze the gutter to remove the union piece before peeling away the damaged gasket with a new one. If after repairing, sagging continues with water pooling up and overflowing, had more brackets along the gutter segment to add support to remove the sagging and the issues it causes.
When water begins to overflow from a hopper head, this usually indicates that there is a blockage within the hopper head. An indication to the seriousness of the blockage can be found when it begins to overflow verses the amount of rainfall. If the water begins to overflow after extended periods of time during heavy rainfall, this will mean that blockage is relatively small, only causing a small reduction of water flow within the pipes whilst, during light rain fall.
Overflowing would indicate a large blockage preventing all water from proceeding to the rest of the system. Fixing this issue is a simple task and be undertaken personally. Initially, checking and removing any debris caught in the hopper head may remove the overflowing issue without the cause of more actions needed. Once done, check the hopper again during another session of rain.
Overflowing will continue if another blockage is still in place further down within the system. Removing this blockage can be an easy task but professionals may be more experienced if dealing with high up areas for safety reasons. Depending on the location of the downpipe that leads from the hopper head, you may be able to covering the drain and using a simple garden hose with the water turned on. Guide the pipe up the drain until a blockage is felt, use the garden hose and tater to attempt to dislodge the blockage within allowing it to fall down the pipe.
Be prepared for water to follow once the blockage to follow. If this does not work or another blockage is in place further above, the use of drain rods from the top can dislodge any blockages beyond the reach of a garden hose or more stubborn blockages. Attempt to rotate the draining rod clockwise to aid in removing the blockage for more effective clearing.
Prevent dislodged debris from the blockage from entering the drain with a simple rag cloth or towel to cover the bottom of the downpipe. Proceed to scoop out any debris that would cause a blockage with a trowel or with a gloved hand before removing the rag and rinsing the gutter and downpipe with water to ensure any remaining debris is washed out and is working efficiently.
Checking the downpipes connecting bolt should always be the first step. This is because it is the easiest repair possible when fixing a loose downpipe. If a connection bolt is missing, simply replace is with a galvanised bolt of the same size. Although this may be a reason for loose downpipes, it is not the only cause. Another issue that can cause the same effect are missing or loose wall plugs that have loosened due to weather. Simply replace the missing wall plugs if needed or tighten any loose wall plugs to make the downpipe sturdy once again.
Replacing guttering that uses lightweight materials like PVC can be done personally but heavier materials like cast iron or steel should be taken carefully and is often left better to professionals due to the weight, handling and height. Begin by adding large nails beneath the gutter into the fascia board to support the gutter whilst holding it in place when removing to reducing the chances of the segment of gutter falling. Once complete, remove any bracket that is keeping the segment of gutter attached to the fascia board, cutting through the nails can be done if needed and tapping it on one end with a hammer to dislodge it.
Afterwards, tie a rope to that end before breaking apart the joint, unscrewing any brackets that where supporting the piece of gutter to the fascia board. Once done, tie a rope to the other side then slowly lower the section to the ground to prevent shattering or damage to the pipe or ground below. Continue with this process until all piece s of gutter that need to be replaced have been safely removed.
When replacing the pipe, fit a gutter bracket towards the top of the fascia board at one end of the guttering with sting tied around the base of the bracket. Use the manufactures information to ensure the use of correct size and number of screws to securely hold the new gutter before commencing. Ensure that everything measures correctly and can be joined before commenting with the replacement.
Using the string that was tied to the base of the bracket, check that the string is at a slight slop to ensure water travels down the gutter towards the outlet, roughly 10mm for every 6 meters. Mark all the other brackets that will need to be installed along the sting, no more than 800mm apart for slandered roofs to 600mm for roofs with a steep pitch, 150mm for any joints or fittings.
Once marked and measured, begin to fit all the newly marked brackets. Using a union piece at the start, begin fitting the pieces of replacement guttering, using joints where needed. When you reached the end, cut any excess guttering before placing and finishing the final joint.
Downpipes are installed differently, but the principals remain the same. Using a spirit level to ensure a perfect vertical line, mark where the downpipe will lead down from the outlet to the drain. Holding a downpipe clip over the vertical line, begin to mark the fixing holes on the wall to that their locations will be marked when the downpipe clip is removed, beginning with the first downpipe clip which will be located 10mm below the outlet. Do this down the line for at least every 1.8 meters down the wall until you reach your desired length at the bottom of the wall.
Using a drill and sturdy, secured ladder, drill into the fixing holes with the recommended size that the manufacture states. Insert wall plugs into the freshly made holes. Starting at the top, Fit the first downpipe segment to the socket, proceed to fixing a socket clip over the join and screw in securely to the wall plugs behind.
Continue doing this down the vertical line ensuring all socket clips are fastened securely before reaching the bottom. For the last piece of downpipe, fit a shoe piece to the bottom of the piece so that any water sent down the system will be directed towards the drain before finishing with one final socket clip.
This article and guide has been written with one purpose: Explain to you the most important things about aluminum recycling. This in depth overview is going to explain you everything about this process. We’re also going to cover important aspects like why it’s important, how does it help, etc.
This process has a main goal: To convert scrap aluminium into useful products. The goal is simple, and its benefits are multiple. First off, it’s more energy-efficient and affordable to recycle this metal instead of creating aluminium.
Recycling this metal consists in simply melting it again. Creating new aluminium requires a higher amount of energy and money, because it uses a complex processes which is based on the electrolysis of aluminium oxide. And this oxide is extracted from bauxite ore and refined using the Bayer Process, which also requires a significant amount of energy and resources.
Recycling aluminium is a common practice for the reasons exposed before. That’s the reason why the 31% of aluminium in the United States of America is obtained through this process.
Curious fact: The leading source of scrap aluminium are used beverage cans.
Now we will go in detail with the advantages and benefits of aluminium recycling. We have already seen an overview on the advantages, but now we are going to go in detail.
The typical process of creating this metal is expensive and requires a significant amount of energy. On the other hand we have the recycling process, which barely requires about 5% of the energy used in the traditional extraction and creation process.
It’s calculated that the amount of energy saved by using this process is enough to power up to 4.4 million European homes. It alone brings a very clear vision on how much energy is saved by using this process instead of the traditional one.
It also saves the energy used in extracting Bauxite ore. Every single year recycling avoids 5% of the mining of this ore. Hence an important amount of energy is saved thanks to recycling.
So how does it affect the environment? It was pointed out that recycling cans are the main source of scrap aluminium. Approximately 50% of these cans are recycled every single year totaling 105 million cans a year. Such an enormous quantity would be enough to build approximately 70,000 Boeing 737 airplanes. This gives us a vivid and clear image on how much aluminium is saved.
Even though every year 1.5 million tons of aluminium cans are wasted every single year, this practice of recycling this metal becomes more common and the amount of wasted cans will be reduced in the future. Another great thing about this metal is that it can be recycled over and over again without affecting its quality or composition. That’s why we still use 75% of the aliminium produced since the 1880s.
It also helps the planet by reducing greenhouse gases. This industry produces an important amount of carbon dioxide, which can be reduced if this metal is recycled instead of fabricated from scratch. The smelting of this metal also produces nitrogen oxide and sulfur oxide, two other damaging gases which are part of acid rain and smog.
This process can also be of great benefit for the local communities. This industry is reported to pay approximately 2 billion dollars every year for recycled aluminium cans. This money can be used to support several local organizations, churches, schools, etc.
Herein lies a great opportunity for local communities which are looking for the acquisition of new funds. This is a never-ending campaign, because this industry is ready to buy all the aluminium cans possible. The US is still behind other countries like Switzerland, Norway, Finland and Germany which recycle up to 90% of these containers.
Aluminium used in Guttering
Many companies are now utalising recyled aluminium in their manufacture of gutter systems. Bespoke Guttering use 90% recycled aluminium in their seamless gutters.
The main reasons for this sharp increase in gutter production is primarily due to its lighweight attributes, coupled with his durability. This is particulary advantageous with the UK weather system.
We have seen the great advantages offered by this process: It saves energy, resources and money, it helps local communities and also our planet by reducing the emission of greenhouse gases and creation of waste. But how are cans recycled? We’ll briefly explain this process under this section.
This is how used cans are recycled in this industry. This process requires a modest amount of energy and resources, because it simply needs 5% of the energy used in the traditional process.
We’ve seen the most important aspects of this process. It saves resources, energy and helps our planet. It also represents a great funding opportunity for local communities. It still has a way to go, because not all cans are recycled, but this percentage increases year by year.
As we have now arrived in 2017, what is going to be this years trend in guttering? Well, from what we have seen anthracite grey aluminium guttering is going to be the premier choice colour. Could the colour of your gutters really improve the value of your property?
The popularity of anthracite grey guttering is down to two things. Firstly anthracite grey gives a home a contemporary look. Secondly black and white guttering tends to be a bit boring, “why have something that everyone else has”.
Aluminium guttering in 2017 is going through some other key inclinations.
Nature is the biggest motivation this year in aluminium guttering color palette. Take for an instance- the shade called leafy green. This has turned into a smashing hit since its launch into the market. Denim Drift is another hottest tint that is trending.
Glowing color contour is picking up traction as well. Honey Glow, a shade of yellow, is ruling the roost outside the neutral color zone. Do you cherish bold hue in your home exterior? Then you may root for Violet Verbana. This is a shade of purple and has gained a number of admirers amidst property holders already.
However, the wood-look for gutter is quite classic and still is in vogue. In case you want your house to stand out, why not go for teak-hued gutter?
Aluminum guttering is most well known among the builders and house owners- alike. Apart from durability (it can last as long as 30 years) and low cost, it has smooth surface. This in turn leads to easy spread of the paint. The leading guttering companies will give you plenty of choices in terms of color schemes. You are surely going to discover your dream color on the list.
Home owners these days are time-strapped. Aluminium is low-on-maintenance and that’s why 2017 is also witnessing a surge in the interest for aluminium guttering. Whether you are seeking out professional help in cleaning off or paint aluminium gutter or doing it yourself – you will find lots of options in both of the cases. The cost-effectiveness of this particular metal has been stated above. Apart from this, aluminium gutter can bear with any outrageous weather- be it storming or snowfall.
Also resale value of a house is on the top priority list of any property holder nowadays. The curb appeal of a house increases when its window-and-door trims match up with the color of gutter. In 2017, the home owners are becoming more competitive in pulling up a high price for their residencies. That’s why from nowonwords, the home construction market will definitely witness matching trim and gutter shade.
As the world is becoming keener on sustainable development, how can the guttering industry be any exception? Recycled aluminium is a hip material now to use in building gutters. This contributes zero toxins to the environment- thus making it the most sizzling metal among new-age home buyers. On the off chance you are interested in going the earth-friendly way while building the gutter of your house, don’t hesitate to spend extra in sourcing off the recycled aluminium metal.
You shall be rewarded with peril-free living environment and low-maintenance draining system in turn. Also sustainable aluminium is averse to easy corrosion or dampening. So that’s another bonus point to care for Mother Nature.
Keep in mind that even for the hardest DIY enthusiast, recycling and installing an aluminium gutter itself won’t be an easy task. Hiring a reputed contractor would be the ideal way to go forward here.
What happens when you have no plan to replace your old gutter with an eco-friendly one? Well, use organic cleaning solutions in that case. Add rain barrel to your gutter to conserve resources. Downspouts extension is another sustainable way to channelize water from gutter to garden.
Whoever has thought that robots can clean off gutters one day? Innovation is catching up with the building industry too. Keep yourself updated with the latest gadgets about gutter scrubbing. Vacuum gutter cleaning kit is topping the chart among various cleaning devices. This special kit includes 120 degree nozzle and expandable wands. These key parts blast away even the last particle out of the gutter. AirLeave is another well-liked gadget that cleans off the gutter by generating strong air-thrusts. Pressure Washer Gutter Sprayer is another water-based tool that is having its moments of fame among house proprietors.
Web is becoming a chief influencer in deciding everything for the millennial house holders- be it the color of guttering to design to earth-friendly materials. Regardless of whether it’s joining Facebook groups to connect with other house owners or going through the house decorating catalogues- the digital medium makes everything easier.
Want to know whether the biggest contractor of your locality has your favorite gutter shade? Go the website, gather the mail id and shoot off an e-mail requesting for PDF copy of color chart. Reputed companies sometimes provide color palette links in their official sites themselves.
Apart from RAL color chart, most of the reputed sites will show you a diverse collection of BS color graphs too. They also contain different types of finishes that go hand-in-hand with the shade of your gutter.
Googling can land you up at various pages that teach the buyers about distinctive gutter designs and materials. These articles or blogs are generally written by construction experts.
Besides the trending palettes of this season, you will find plenty of tips to maintain the gutter for different seasons- be it spring or autumn. Learn DIY techniques, latest cleaning arrangements and house exterior decoration tips. Digital medium is now gives you the freedom to do all these while moving from one place to another. So enjoy it fully.
DIY painting or scrubbing of aluminium gutters is quite a trend in this year. For DIY gutter painting, you need few tools such as- paint brushes, ladder, soap, primer, hose, paint scrapper and grout sponges. Make sure that you have enough safety gears and adequate helping hands (friends, family members) at disposal to execute a specific task.
For cleaning purpose, you need to have necessary instruments including ladder, goggle, gloves, plastic scoops among others. Different seasons have distinctive cleaning methods. These techniques also vary depending upon your house’s structure and height.
On the off chance you have not done gutter cleaning before, do it under expert supervision for the first time. In case things won’t go as you planned, don’t hesitate to ask for professional help.
YouTube videos are also there to teach your step-by-step DIY gutter painting, cleaning or small mending jobs. Side note: you can’t achieve the pro-finish if you are not experienced.
It is important to consider how your choices will affect the environment now and in the generations to come. That is why many homeowners are seriously considering the kinds of materials used in their homes, making certain that what they choose has a positive impact on the environment. Environmental concerns have reached every part of the home improvement industry, including guttering. While aluminium is the most popular guttering material to use, it is vital that its environmental impact be examined.
One major component of environment impact pertains to how many resources are being used to develop, manufacture and maintain items. Aluminium guttering actually achieves an incredible environmental impact rating in these regards. The cost of aluminium guttering is very low when compared to PVC, timber or steel. All the alternatives to aluminium are either more costly upfront or more costly over time. And aluminium is durable but lightweight, making it easy to keep up with, replace and reuse, particularly continuous aluminium guttering is fast becoming our most popular style of rain gutter. Over time, the savings that recycled aluminium provides ensure that the initial investment pays off. That makes it an affordable material for people, no matter what their budget may be. So anyone can enjoy its benefits and reduce their environmental impact.
Aluminium is an extremely safe guttering material, especially when compared to uPVC. Aluminium is non-toxic and creates no harmful by-products as a result of its decomposition. uPVC, on the other hand, gives off fumes that are toxic to the environment, when it is manufactured. PVC can also be harmful to the environment when it is broken off or chipped away. Its brittle qualities ensure that it will break down or break off at some point, causing environmental concern. Aluminium is completely safe to handle, and there is little environmental impact resulting from its widespread use. That is because much of the aluminium that is used in guttering comes directly from recycled metals. This is a material that is long lasting and can be used over and over again without consuming precious manpower, manufacturing effort or other valuable resources.
Additionally, aluminium will not react to water and change the acidity of rainwater as it falls from the roof. The same cannot be said for other guttering material. Aluminium is simply the safest, most eco friendly guttering material available, and if you have the opportunity, contact your local aluminium guttering installers and have your guttering replaced with aluminium. Contact us if you would like us to install aluminium guttering on your property.
The installation and repair of guttering is a job that takes a lot of skill and knowledge. It’s not a job just anybody can do, and it is not a job that you should trust to just anyone. And that is why you should know about us. There a few simple things to follow when hiring a contractor.
You would think that at a bare minimum each contractor would have the proper certification and training to do the job. But there are many unscrupulous contractors out there, and they will take advantage of you if you are not careful. The best way to make sure you are getting a contractor who has at least some training and skill is to ensure that they are certified in their craft.
If a guttering contractor is certified and trained, they will usually display such information on their website or in their office. Be sure to ask about qualifications before you decide on your contractor.
There is a lot that can go wrong during a gutter repair or installation. And if your contractor falls off a ladder or damages your house, then you want to make sure that he has the insurance to cover it. Before you hire a contractor you should ensure that he has coverage for damages incurred both to himself and to your home. On that same note, you should make certain that the contractor will guarantee his work. If he does a poor job, you want it to be fixed without having to pay additional fees. So you should check your contractor’s satisfaction guarantees before hiring him.
Any contractor that is worth much will have some references for you to peruse. And they will be glad to connect you with past clients or show you work they have done previously so that you get an idea of the quality of their work. If your potential contractor is hesitant to provide you with references or show you work they have done before then that should be a warning to you that they may not be very good at what they do.
Before you choose a contractor, you want to make sure that they can do the work you need done and that they won’t leave you with a mess to clean up afterwards. Ask them if they have previously done the kind of work you need them to do. And see if they will be able to clean up after themselves. Ensuring they using high quality guttering is essential.
You may also want to determine if they offer a warranty for their work. This is slightly different from service guarantees, as it gives you a legal contract that ensures the products and services they provide for a number of years. A bare minimum for guttering warranty would be one year, but three to five years is preferable. This North East contractor is Safe Trader Registered and its little things like this a home owner or business should be looking for. If a small local business has taken the time to register themselves with the local authorities, then they will be a much safe bet than somebody who has not.
Apart from the above-mentioned points, hiring the right guttering contractor merits more detailed homework.
This is a quick-shot way to dig more about the potential contractors. Facebook has plenty of dynamic groups formed by house proprietors in various areas. Just pop up the question about the best contractor in your town and you might receive the appropriate answer quite fast.
On the other hand, an online reviewing site like Yelp can provide you with the rundowns of ratings and stars yielded by guttering companies in your city- from real time customers. Go through the reviews to gain better understanding and information regarding the top contractors in your locality. Relying upon word-of-mouth advertisement is another solid way to sign up the best talent in the gutter installation business.
To tap onto the right contractor, plunge into the technical details of guttering. This will help you to set up a questionnaire to filer out the potential contractors. The primary aspect should be around the sizes of the gutters. The majority of the installers emphasizes upon 5 “gutter size, even if your house would be more benefitted from 6” measurements. Why so? Because, the latter dimension carries 40% more debris, is suitable for spacious rooftops and is relevant for houses that are up to 25 years of age.
Gutter levels and hangers are mandatory for correct gutter pitch and durability respectively. Research about them, else you might be misinformed by a fraud contractor.
The standard practice of guttering industry is – get-in-and-out of the task as quickly as possible. Due to the lack of technical learning, house-holders fail to perceive the significance of gutter well being or downspout placement in order to stop rooftop leakage or decaying of the wood. So collecting guttering knowledge is compulsory. More so, when your house roof has intricate, detailed designs or is multi-layered.
Can the contractor elevate the gutter size? Will the company redesign it? Best, if the company furnishes you with illustrations or photographs of the previous improvement works it has executed.
Each filtering out process has its own set of red flags. So beware of the set of red flags apart from forged documents or exaggerated experience. The first alarming sign should be delayed reply of your phone calls/e-mails on behalf of the company rep. Is she/he avoiding your detailed inquiries? Then quickly call off further negotiation with the company.
On the other hand, a sales rep forcing you to take an on-the-spot decision must be hiding any inherent flaw of the company’s service. As a house proprietor – know your rights. Taking as much time as you want before investing on gutter installation- is one of them.
Does the contractor you have zeroed in finally, offer gutter guard? What will she/he do if you are aiming to induct enclosed gutter for your house? In case the company rep affirms this product, then ask for proofs of previous such installations carried out by the organization. Many contractors offer cleaning services in tow. In that case, there should be a room of negotiation for slashed down price for the whole gutter installation+ annual cleaning package.
Aluminium guttering has long been the favoured material for guttering by professional roofers and roofing contractors. They know the advantages of using aluminium and how it compares to other methods, but do you? Let’s look at how this popular guttering material compares to the widely-used UPVC guttering.
Aluminium guttering is very durable. It can hold up under adverse weather conditions, and it will last for years without needing maintenance or repairs. It also does not rust, and even falling branches or other physical attacks will rarely make a difference in its performance.
UPVC, on the other hand, is quite brittle. The lowest quality plastic guttering will decay under intense sunlight or just through natural wear and tear over a short period of time. And UPVC gutters can be damaged simply by leaning a ladder on them, to say nothing of the damage caused by falling branches or hailstones.
UPVC gutters may be cheaper than aluminium gutters, but they don’t last nearly as long. Aluminium is actually quite cheap, especially when compared to the costlier steel gutters. And their durability means that investing in aluminium gutters is a sound decision.
Maintenance costs are low for both of them, but once a UPVC pipe is broken, it won’t retain its functionality. And even repairing it will not help much, as it will be weaker than before. Aluminium gutters require very little maintenance and upkeep over time. If they are damaged, they can often just be bent back into shape and still be perfectly usable.
Aluminium gutters are versatile, and you can shape them without much trouble to fit the design of your house. If you have bought UPVC gutters that aren’t made for the shape of your house, you may be wasting money. They cannot be reshaped or modified to make them work for any other shape than the one they are already in.
And if your UPVC gutter is damaged, it is going to start leaking and losing its usefulness. Aluminium, on the other hand, does not leak. If it becomes damaged, it will usually tend to just warp or bend, and correcting the problem is often as simple as bending or pounding it back into its original shape.
If you want guttering that will last and that has some real worth, you definitely need to go with aluminium guttering.
Guttering is an essential part of weatherproofing your home, and yet we often take our gutters for granted. However, they play an important part in keeping rainwater off your roof, and ensuring it’s carried away from your property. Most people don’t even think to check their gutters until they’ve become clogged with leaves and dirt, but a bit of preventative maintenance could prevent issues with your gutters. Here are some tips for keeping them clean and clear.
Gutters should be checked regularly, and most homeowners will schedule an annual clearance to get rid of debris. This is best scheduled after the fall of leaves, perhaps in early winter, as this will ensure you’re ready for the bad weather ahead. Going up ladders can be quite dangerous, so you might want to book a gutter clearance through a property maintenance company or similar. They’re clear all the debris, from leaves to litter, as well as checking for any loose guttering that could cause problems in bad weather.
If you find you regularly get blocked gutters, then adding a mesh or gutter brush can stop debris falling into the pipes, while still allowing water to flow through. However, you’ll still need to check it regularly to ensure it’s in place. We would recommend using a gutter cleaning professional.
While the gutter cleaning is underway, this is an excellent opportunity to check for any damaged or cracked pipes, or any areas coming away from the wall. Damaged gutters lose their effectiveness at removing rainwater, and pipes coming loose can also be a safety hazard during storms.
Leaking joints are a common problem in gutters, as dirt gets in-between joints, forcing them apart and leading to cracks. Over time, this can cause leaks, which can cause damage to your home, eventually threatening its structural integrity. Therefore, regular checks of your gutters could potentially save you money by helping you avoid damage. Luckily, repairing cracks can often be easy, with a waterproof sealant needed, so you can sometimes avoid getting new pipes.
Not many of us have to worry about gutter repair and replacement. Aluminium gutters will often last at least 30 years. And many UPVC gutters come with 10 or 20 year warranties. However, to ensure you get the longest life out of new gutters, you’ll need to schedule regular maintenance, and ensure any issues are quickly resolved.
Most homeowners don’t think about checking their gutters until there’s already a leak or blockage, so make sure you mark a day each year for cleaning. This will ensure you get the most from your gutters, and that your home is protected from whatever weather is ahead.
Apart from the points, gutter maintenance and cleaning can be accelerated with the following techniques as well-
Cleaning gutter can be quite exciting if you are DIY enthusiast. Ensuring that you have safety gears at place is as important as knowing how to clean gutter like a pro. Ladder is the most critical tool while scrubbing gutter. In case your house has one storey, use a four-legged ladder. Someone holding the ladder from beneath is a must.
Thick leather gloves will protect your hands from needles, sharp leaves; animal excrement etc. Don’t forget to wear goggles while removing dirt from gutter. Lastly, plastic scoop and bucket are other basic necessities.
While cleaning, expel the substantial debris first. It can be anything- from a bird’s nest to pile of cobwebs. For digging out rubbish from twisted corner, borrow a trowel or snake tool. This will ease up the process of scooping up the rubbish that has become too sticky to leave the gutter-wall. Once it done, hose up the gutter lengths thoroughly.
On the off chance the water stops draining due to obstinate clogging, then it would be better to call up a professional. Clueless splattering may damage your house foundation due to excessive water application.
Gutter guards halve your endeavors in keeping gutter squeaky clean under any weather. The screen guard channels the water through a casing while leaving the debris at a bay. Nonetheless, it’s of high upkeep. Insert guard uses foam to filtering the water through and it’s least expensive. But for tiny debris, it is not the most effective.
Finally, reverse curve is an advanced guarding technique which nicks the debris flow and turns the water through an arc. However, this one doesn’t work well in stormy weather. So depending on your budget and location, take the informed purchase decision.
Each season has its own method of gutter cleaning. When it’s snowing outside, then ice dam may ruin the rooftop by preventing the icy water from draining. Insulation and ventilation is the way to go here tidy up the trash, rather than traditional methods. During rainy season, the downspouts need extra care to flush out the water- away from your house.
Dry well is the best solution here. 2 to 4 feet wide and 3 feet deep drum well is ideal to keep the water away. But do check on with the local authority before setting up one in your yard.
Keep yourself updated about the latest cleaning instruments. Best part? Ladder is not needed while applying any one of these tools to clean gutter. This is will lead to zero safety peril. Gutter flusher-cum-cleaner is one such apparatus that practically blasts away small particles of debris. This spray has a pole which can easily be attached to a hose. The ergonomic setting comes with a mirror to chase down hidden debris.
The various vacuum adornments and tongs likewise present swift cleaning service to remove pine needles, dry leaves, and animal wastage from gutter. But remember, each of them has limited capacity, as they are applicable only to small buildings where you can scour the gutter- while standing on the ground.
There are other good measures one can take up for maintaining gutter health and cleaning it up.
A pressure washer is by far the most convenient tool to clear off gutters and downspouts. Best part: you can borrow it effectively in less than $100, in case you would prefer not to purchase one right now. Pressure washer doesn’t hurt gutter, yet blasts away even the tiniest particles of junk with high-force water stream.
Simply make sure you don’t focus the water force from bad angles- while cleaning the gutter. Otherwise, the shingles might get hauled out by such penetrating weight of water flow. For best outcome, go through the instruction manual multiple times before utilizing the tool.
When the rubbish is in soggy state, you may either apply “scoop and drop” method or “gutter bucket“technique. In the previous case, first spread a plastic cover over the ground. Then scoop out the dry leaves and toss them on the sheet lying below. This process is quick but can get messier.
In gutter bucket system, take a bucket with flexible handle. Convert the handle into hooks and then hang it on gutter edge. Dig out the trash and dump it in the pail. This takes physical labor-intensive. For dry trash, the gutter bag method is quite successful.
For the longevity of gutter, rinse it section-by-section once you done with scrubbing off the drain and the downspouts.
Once in a while, come out of the house and try to hear the sound of water-flow that is going to the underground via downspouts. Regular water flow means your downspout is working well. Do it more often during the rainy season.
Pick late morning as the time when you will execute the gutter cleaning task. House rooftops get dried by then from the early morning mist.
In DIY gutter cleaning, a ladder is indispensable. Never go for a wooden ladder, though it might appear as the best choice primarily. A wooden ladder can get quite unsteady and accident-prone. In the event of spacious house rooftop, it might take hours to scrub off the gutter.
A fiber glass ladder provides sturdy service but is heavier to move around with. Go for aluminium stepping-stool instead. Invest on a pair of rubber shoes, just for the purpose of gutter cleaning. Your chance of slip-ups while walking on the roof will be reduced drastically.
One glaring mistake many house-proprietors commit while cleaning gutter is overlooking power cable lines.
It’s pretty normal for cable lines to create mishmash on roof top from the power poles. If that is the case with your house rooftop, then beware of bad wiring before cleaning the gutter. There would be the risk of getting electrocuted, if the damage is not repaired in time. This gets all the more perilous during monsoon. Do routine check-up on the power cable lines running over the roof of your house.
For terrible wiring, calling up a professional electrician is the ideal solution. Once it’s repaired, you can continue with the cleaning-chore.
There are a number of different types of gutters, and each has their own unique style and pros and cons. We will cover some of the more notable ones below:
Fascia gutters are so called because they are attached to a fascia board. These are most commonly seen on customized gutters and are usually placed near the ends of rafters. They are often intended to hide the ends of the rafters from sight.
These gutters are in the shape of a half open circle, and they tend to hang from the roof. They are not very common, however, since they don’t usually work very well. They often overflow easily, particularly if the gutters were not installed properly or if the roof is not level. Their poor drainage means that they have to be cleaned more often than other types of gutters.
K style gutters use a ridged crown molding design that gives them a unique and sophisticated appearance. They are actually the most common type of gutter you will find, and they are excellent at draining out water and not becoming overburdened with debris and spill off from the roof.
These gutters are most often shaped like the half round style gutters, but the major difference that sets them apart is the outward-facing bead. Whereas most gutters are made from some type of plastic or vinyl, European gutters are generally manufactured from copper and other materials designed to be weatherproof.
You will not see wooden gutters very often. These were far more common in the past, before plastic was available. Now they are really only used in restorative efforts on old buildings, or an aluminium guttering style.
An alloy of iron that has been manufactured with the help of pig iron when it has been heated till it enters the liquid state. It is now known as cast iron. Cast iron is the mixture of silicon and carbon which are added during the process so as to improve its physical properties. Both of these materials help to make the cast iron gutters to be an ideal material for the manufacture of different types of products.
In the market a wide variety of cast iron gutters are available. These cast iron gutters are made of deep flow half round, victorian, molded ogee, half round and plain half round. You will also be able to get them in all types of sizes so as to suit your exact requirement. Moreover, they are available with all the essential accessories such as union joints, outlet and bracket. You can of course get them replica style, using cast guttering in aluminium.
The main aim behind the usage of the cast iron gutters is that they are able to collect rain water from your roof so as to direct it away from your home. If allowed to accumulate it could cause damage. Now the next question which might be going on in your minds is whether or not your gutter system has been properly designed. A well designed systems drain is able to keep the water out from under the foundation of your home while keeping your siding, fascia and paint dry.
Making use of cast iron gutters has a lot of benefits over the other types of gutters. These are as follows:
You can very easily maintain the cast iron gutters properly. Here are some tips:
Let’s thank the amazing advancement in digital technology because you don’t have to clean your gutters yourself. It’s a little easier today to cross tasks off your to-do list with the help of latest gadgets available for your guttering. They are fast, safer and efficiently time saving!
Cleaning your gutters can be really frustrating with all the squeezing and plunging to unclog the guttering, and while the gutter cleaning robot isn’t going to do the whole job for you it will make the whole process pretty much easier.
Kick back and let the iRobot clean the gutters for you!
iRobot is there to clean your gutters for you without having much of your physical involvement. It is a remote controlled robot which completely cleans out the guttering by getting rid of branches, leaves, dirt, debris and anything else clogging up the gutters.
Simply place the iRobot in your gutter and press the start button to begin the cleaning process. The powerful auger attached to this gadget rotates at 500 rpm and uses its durable plastic & rubber blades to remove and dislocate stubborn debris inside the gutters. It is really easy to use and keeps you from having to stand on the top of the ladder for too long. Just charge it up and use the wireless controller to send it on its way to one end of your gutter. This iRobot Looj 330 gadget stays charged for 3 hours and can easily clean 30 feet of gutter in just 5 minutes.
Not only will you save plenty of time by using the iRobot gadget but it’s also a much safer alternative to get your guttering cleaned. It eliminates your need of having to constantly reposition and stand on your tip-toes on those dangerous heights as long as you are cleaning the gutter yourself. iRobot ensures faster cleaning process of your gutters so you can finish off tasks on your to-do lists much quickly.
You can get this gadget iRobot Looj 330 for only £300, and it is slightly expensive. But have you wondered if you pay someone else to do it for you just once, it costs you an average of £200 or more. Then what’s your excuse of not getting one for yourself?
Besides robots, there are other cool appliances to clean up gutter. Let’s find out-
Popularly known as magic bags, these little pouches can clean up your gutter without the utilization of ladder, scoop, blower or other such instrument. The best time to use these bags has to be the post-autumn period. Just toss up few sachets on your rooftop from below.
Once it starts raining, the biodegradable solution will break off leaves and other rubbishes. What’s the best part about using them? Twice-a-year clean up is enough to ensure that your rooftop is devoid of unhygienic trash heap.
Gutter Clutter Buster (aka GCB) is the newest addition-on-the-block among DIY gutter cleaning tools. No more injuring your knees while climbing up the ladder! With GCB, you can remove the debris of a two-storied building from the ground. This kit comes with 3 separate pieces, which are pretty easy to assemble together.
Whether you want to attach it with dry vacuum or the wet one, the powerful suction system of GCB will pull off even the stickiest particles from twisted angles. The latest upgradation of GCB presents a blower nozzle to blasts away rubbishes with strong air-flow.
For old-fashioned house proprietors, who find it odd to clean up gutter without using a ladder, Gutter Getter is the ideal contraption. It is easy on the pocket too. This 42-inch extended pole enables you to scoop out leaves, twigs or cobwebs from the drain-interior as well as around and under of gutter hangers.
On the other hand, AirLeave is the powerful blaster that uses air to blow off debris from the clogged drain.
This telescopic gutter cleaner flaunts cutting-edge technology. For DIY lovers, it won’t get better than this. The extended shaft allows you to blow off leaves, twigs, and old nests from rain gutter, curbs and other dubious spots, while being connected from garden hose.
The 1.05m-1.74m telescopic size makes it convenient to monitor the location of the debris while you are remaining on the ground. This kit comes with a metal neck and zinc valve. The water spray coming out from the other end of the blower can be maneuvered into different directions.
Gutter monitoring camera system is another high-tech gadget that is taking the industry by storm. You will find plenty of selections in the market. In any case, for long-term arrangement, it would be prudent advisable to go for the best camera system, even if you have to shell out extra. A gutter cleaning camera system allows you to check out damp, hidden trash so that you can wash them off altogether.
Always go for weather-proof camera mount which should be flexible enough to ascend on top of a vacuum device. The mount should get on with any vacuum length between 38mm-76mm.
Cleaning a gutter can take all day, especially for multi-storied houses or expansive rooftops. The camera battery must deliver 6-8 hours of extra back-up to give you the leeway clean-up time. Look for 5” monitor screen for ideal supervision.